Electrothermal actuators (2 point)
Tender specification:
Oventrop electrothermal 2 point actuators with First-Open function (except for actuators open with current “off”) and stroke index. Available as model closed with current “off” or open with current “off”. The actuators can be installed in any position. Simple plug-in connection with valve adapter.
Models 230 V: | Item no.: | |
Connection thread M 30 x 1.5 | ||
“H NC” closed with current “off” | 1012415 | |
“H NO” open with current “off” | 1012425 | |
“H NC” closed with current “off” | ||
with integrated auxiliary switch | 1012435 | |
“H NC” closed with current “off”, cable 2 m long | 1012452 | |
“H NC” closed with current “off”, cable 5 m long | 1012455 | |
“H NC” closed with current “off”, cable 10 m long | 1012459 | |
Squeeze connection | ||
“H NC” closed with current “off” | 1012418 |
Technical data: | |
Operating current: | 230 V AC, ± 10 %, 50/60 Hz |
Start up load: | < 550 mA for a max. of 100 ms |
Continuous current: | 4.5 mA |
Closing/opening time: | about 5 min. |
Piston stroke: | 5 mm |
Operating power: | >90N |
Auxiliary switch, | |
switching current: | 5 A resistive load, |
Auxiliary switch, | 1 A inductive load with 230 V AC |
switching point: | about 2 mm |
Protection: | IP 54 in any position |
Protective system: | II according to EN 60730 |
Fluid temperature: | 0 °C up to 100 °C |
Ambient temperature: | 0 °C up to 60 °C |
Storage temperature: | -25 °C up to +60 °C |
Connecting cable: | 2 x 0.75 mm2, 1 m long |
4 x 0.75 mm2 (item no. 1012435) |
Aktor T 2P
No review(s)